Feb 27, 2008

Fears over China plastic waste import ban


The Chinese government is rumoured to be banning the import of some plastic packaging waste for reprocessing from as early as Saturday (1 March), packagingnews.co.uk has learned.

The British Plastics Federation (BPF) has been made aware that a ban would most likely affect low-density products such as plastic bags and netting, although it could include all baled plastic waste.

One interpretation is that the ban is linked to the Olympic Games in Beijing, which runs from 8-24 August, after which it could be lifted.

China has already announced a ban on the domestic "production, sale and use" of ultra-thin bags, defined as being less than 0.025mm thick, from the beginning of June.

China and Hong Kong are the destinations for the majority of exported UK plastic waste.

BPF director general Peter Davis said a Chinese ban could have a serious impact on the UK's ability to meet landfill directive targets.

"It's already borderline if we are going to achieve it," said Davis.

Mark Burstall, chairman of the BRC recycling council, said the UK plastics recycling industry was "pretty versatile and investing a lot of money in increasing capacity", but would be unlikely to be able to react overnight if China introduced a ban.

"It's a reasonable deduction that there would be a surplus of material in the short term," he said.

Bernard Chase, purchasing manager at Linpac Plastics Recycling, said that, were the rumour substantiated, it might impact direct imports to China, but material could still enter via Hong Kong, which is perceived to have less stringent controls.

Chase hoped that, even if the rumour was not true, it might "stimulate the debate" on the long-term sustainability of relying on export markets for packaging waste recycling.

"I think we're starting on a road where China is tightening up on quality, which is what we set out do; recycle with quality in mind," he said.

The demand from China for mixed plastics encouraged comingled collections in the UK, which affected the quality of materials available to reprocessors, he said.

Communisis 2007 figures show five-fold increase


Communisis has defied tough trading conditions and posted a 472% increase in profit, after restructuring costs, to £10.5m.

The company claimed the growth was driven by cross selling and the realisation of its new print management model.

The preliminary full year figures showed a significant improvement in operating cash flow to £27.9m and a 42% reduction in debt to £26.3m.

Steve Vaughan, chief executive of Communisis, said: "We are pleased with the results. 2007 has gone every bit as well as expected and, in some respects, a lot better."

The company's once troubled Leeds direct mail factory is now "firing on all cylinders" following a turnaround.

Profit at the site was up 129% to £3.9m in the second half of 2007 boosted by the installation of a full colour HP Indigo printer, which is already working close to capacity.

The new account management structure installed by the company last year has seen cross-selling to customers and payment rates rise. In 2006 Communisis was plagued by late payment and by the end of the year a third of customer debt remained overdue.

Most attention to alleviate the problem was focused on the top 60 customers. By increasing the credit control responsibility of account managers, the company has reduced late payment within these accounts from 28% to 8%, with a total of 13% of all accounts overdue at the end of 2007.
According to Vaughan, the new structure has also boosted the company’s cross-selling abilities. "We are now selling services peripheral to print such as customer data and artwork. Print remains important to our offering but increasingly revenue is derived from services that cluster around print."

One such area is the transpromo market which from a standing start in 2005, Communisis has become the second largest statement printer in the UK.

Vaughan said: "Over the past few months we have seen our big customers talk about transpromo in a much more serious way than ever before. They are talking about investment commitments and looking at their data warehousing getting ready for a transpromo drive. That is a real opportunity for us."

Vaughan famously claimed in PrintWeek in October that print management as we know it is dead. These results support that claim. Its print sourcing business, while still a significant revenue driver, has seen profits fall as expected.

Indeed, the company now offers many of its clients zero margin print sourcing. Vaughan said that it will not be phased out but it will continue to decline as a source of profit.

"Our new print management model is based on technology," he said. "There is a set of products and associated services at the heart of that and we are seeing increased demand for these services from our clients."
Source: printweek

Ex-Amcor head Durston joins Britton Group following HSBC buyout


Britton Group, one of the UK's largest packaging companies, has been bought by HSBC's private equity arm and former Amcor Flexibles chief John Durston has returned to the industry frontline as the firm's non-executive chairman.

Venture capitalist LDC, which provided more than £18m for the £46m management buyout (MBO) of the Cheshire-based group led by chief executive Mike Clark in 2004, had put the firm up for sale in January. HSBC was unable to comment at the time of writing.

Durston is the former deputy chief executive of Amcor Flexibles. He is currently a non-executive director of Plantic Technologies, the bioplastics producer based in Australia, and of Inbartec, a Portugal-based firm that specialises in protective membranes for wine closures.

Durston told Packaging News that Britton had a very strong position in the flexo market and had a good order book.

"It's a very well-run company, it has been doing extremely well and I'm hoping to bring a bit of experience to the board," he said.

Durston also said Britton could expand in Europe, "to help support some of our international customers", but it had not faced the same competition from Eastern Europe that had prompted his former firm, Amcor, to shift more of its business to low-cost economies.

Britton is the second-largest supplier of flexible plastic packaging in the UK behind British Polythene Industries (BPI), and produces more than 90,000 tonnes of plastic film each year. This includes food and drink multi-packs, mailing/home shopping films, and pouch packaging for the retail, pharmaceutical, medical and construction industries.

The group has divisions in Winsford in Cheshire (Britton Taco), Louth in Lincolnshire (Britton Merlin), and Hartlepool (Britton Decoflex). It employs around 850 people and generated sales of around £100m in 2006.

Polestar Colchester prints Shoot as IPC and BBC focus on weekly football mags


IPC and BBC have moved to put football back into the children's magazine arena with weekly editions of Shoot, printed at Polestar Colchester, and Match of the Day due to hit newsstands in coming weeks.

Shoot, which is aimed at eight- to 12-year-olds, is reverting from a monthly format to a weekly publication from 26 February.

Printing of the IPC Media-published title, which recorded ABC figures of 35,830 copies for its most recent issue, will remain at Polestar Colchester.

The 64pp magazine is printed on the firm's 32pp MAN Roland Rotoman press and stitched on its Muller Martini Prima line.

The cover is printed on coated stock using its five-colour Heidelberg mini-web press.

IPC Media publishing director Hamish Dawson said the new frequency "makes perfect sense and will be good news not just to readers, but also to advertisers and retailers".

BBC Worldwide is also set to dive into the weekly football game by resurrecting Match of the Day magazine.

The publication, which was previously targeted at an adult audience, closed in 2001, but will relaunch on 4 March aimed at eight- to 14-year-olds.

The magazine will feature star interviews, match results and tables and will be supported by the website motdmag.com, which launches tomorrow (27 February).

BBC declined to comment on who will print the new title.

Source: printweek

Komori boasts in-line pack finishing on new Lithrone press at Drupa


Komori will use the Drupa 2008 exhibition to launch a sheetfed press for packaging and label printers with in-line cold foiling, in-line UV coating and in-line embossing.

The six-colour Lithrone SX629, the latest addition to the LS29 series introduced in 2006, will print at 16,000 sheets per hour (sph) on a maximum sheet size of 610x750mm and thicknesses ranging from 0.04 to 0.8mm.

Komori UK managing director Neil Sutton said: "We first showed the SX629 in the US in 2007, but the foiling, embossing and die-cutting capabilities are all brand new."

He said this version of the press had been designed using expertise from Komori Chambon in France, which also makes web presses for printing banknotes and packaging.

Packaging accounts for 10% to 15% of Komori's sheetfed sales in Europe.

Komori US technical director Doug Schardt said the press speed would slow to around 13,000sph during foiling and embossing.

The in-line die-cutting unit will not be demonstrated at Drupa.

Schardt said the in-line foiling unit was enclosed on both sides and the foil area imaged on a normal offset plate using a standard computer-to-plate system.

"Combined with UV drying and in-line varnishing, it allows high gloss finishes to be added and also enables a variety of plastic and metallic materials to be varnished and embossed in-line," he said.

The in-line embossing unit can be used on short runs and repeat runs, and a patented Komori magnetic die cylinder makes die mounting and removal quick.

Komori, which is celebrating its 85th anniversary this year, will exhibit in Hall 15 at Drupa at the Messe Düsseldorf, Germany, from 29 May to 11 June.

UK can recycling closes on EU average

The UK has made "significant increases" in the recycling of aluminium drinks cans, which rose by a sixth in 2006, but remains below the European average.

UK consumption of aluminium cans - 105 units per capita in 2006 - was surpassed in Western Europe only by Ireland and Sweden, according to the European Aluminium Association.

In comparison, Italians used 37 units each, the French 14 units and Germans three in the same year.

The UK rate of recycling, however, increased from 41% in 2005 to 48% in 2006, according to statistics from Alupro. The average in Western Europe was 57.7%

UK official recycling figures take into account all aluminium products, and the figures are Alupro's extrapolation from packaging recovery note (PRN) data.

The total UK recycling rate for aluminium packaging in 2006 was 32.5%.

Alupro has previously said that UK is disadvantaged by the government's measurement, which also includes the aluminium component of composite packaging, such as cartons.
Source: packagingnews

GAE signs up Leicester supplier CJB for finishing distribution


Graphic Arts Equipment (GAE) has appointed Leicester-based kit supplier CJB Printing Equipment as an authorised distributor in order to supply both existing and potential clients.

As a result of the agreement, the Midlands-based commercial, office and inplant dealer can offer customers GAE's range of Horizon, Perfecta and Dürselen finishing equipment.

CJB will showcase a selection of the kit at an open house in the Leicester site on 11 and 12 March.

Equipment on display will include the Horizon APC-61II guillotine and BQ-150 single-clamp perfect-binder, as well as the EF-35 B3 folding machine and QC S300 collator.

CJB managing director Chris Boulter called the agreement part of the company's ongoing programme "to bring exciting new opportunities for our customers to invigorate their businesses".

He added that setting up with GAE "has been a smooth process. Their understanding of the marketplace and knowledge of the processes has proven invaluable."

GAE joint managing director Bryan Godwyn said: "We have been working closely with them for several years and have found them to be a good organisation with a similar customer-focused approach to us."

Source: printweek

Packaging Innovations Weekly Wrap - Precision Disc Launches Green CD/DVD Packaging Option

Precision Disc is replacing its plastic CD 'Jewel Case' with a printed card stock alternative and a plastic-free bio-degradable disc tray.

Also available in DVD format, the Eco-Case has virtually the identical form and function of its plastic predecessors, Precision says.

Precision also uses vegetable-based inks and water-based aqueous coatings for printing inks and finishing coatings.

The case can be cut and assembled in a multitude of configurations to best suit a client's specific needs.

NOVA LAUNCHES NEW CUPS

NOVA Chemicals has launched a new range of premium beverage cups, featuring increased insulation and improved graphic capabilities.

The Altra cups, suitable for both hot and cold drinks, are available in 12oz, 16oz, 20oz and 24oz sizes with a universal lid.

The four designs include Manhattan Mocha, Haute Tropic, Zen Roast and Svelte Sage and custom graphics are easily accommodated in small to large quantities, NOVA says.

BOSCH OFFERS SWEET SOLUTION

Bosch has designed a new range of packaging and processing solutions for handling delicate products such as tray-baked goods, biscuits and chocolate confectionery.

The company has developed a range of vertical form fill and seal (VFFS) machines that can bag smaller bakery and confectionery products into packaging at speeds of up to 120 bags per minute.

The SVE 2510 QR and the SVE 1800 MR sort biscuits and snacks into a variety of packaging formats such as pillow bags, stand-up pouches or block-bottomed bags, Bosch says.

The machines do not drop any food products into bags from a great height, as that could cause damage to certain foods.

SERAC UNVEILS ATHENA MACHINE

Serac will unveil a new concept of linear weight-filling machine that guarantees net weight filling and optimises the versatility of production lines at the Interpack trade fair in Germany next month.

Athena is a linear machine especially dedicated to production in small series with a great number of references in cosmetics.

Running at a speeds of up to 50 cpm, the machine allows for the transfer of containers fitted in pucks designed to suit the container's particular shape and dimensions.

NZ GETS GRAPHIC OVER CIGARETTES

Cigarette packets in New Zealand will now display graphic images of diseased lungs and rotting teeth and gums.

The gruesome displays, introduced by the government to try to turn people off smoking, are part of the Ministry of Health's five-year tobacco control plan, launched in 2004.

There are around 5,000 smoking-related deaths each year in New Zealand.

The government gains around NZ$980m revenue from tobacco per year.

The use of such images is common overseas, the Ministry of Health says.
Source: packaging-technology

Feb 21, 2008

DS Smith touts green benefits of recyclable corrugated pallet


DS Smith, the packaging and paper manufacturer, says it has developed a "cost-effective replacement for wooden pallets" with a transport pallet made from 100% recyclable corrugated material.

The group said the Evolution pallet was suited to companies dealing with "environmental pressures in competitive markets", as it allowed them to mediate rising timber prices as well as improve their environmental credentials.

DS Smith Packaging's Adam Anderson said the Evolution was "suited to certain markets, like pharmaceuticals and food", and, as such, did not mark the end of wooden pallets.

A 1x1.2m pallet weighs 2.1kg and can be used to carry weights up to 400kg. It is designed to be used for single trips, after which it can be recycled.

The pallets can also be transported flat to be erected on-site, which Anderson said "suited the business model of our customers" and saved up to 80% of fuel costs and carbon dioxide emissions.

"Evolution provides cost savings throughout the supply chain," he said.

DS Smith Packaging has been developing corrugated pallets for the past four years, but Anderson said the company was now "confident it had found the right formula for it".
Source: packagingnews

Wrap loses 30% of budget from Defra


Wrap, the body charged with achieving packaging reduction, will have to work with 30% less funding in England after the government confirmed a budget settlement of £43.2m for the next financial year.

The Waste and Resources Action Programme said, however, that the money from the Department for Environment, Food and Rural Affairs (Defra) was still a "substantial sum" to deliver its "important and stretching" work programme.

The Business Resource Efficiency and Waste (Brew) programme also takes its funding from the £43.2m budget.

Around a quarter of Wrap's funding comes from the devolved governments in Northern Ireland, Scotland and Wales. Their contributions should take its total budget to an "anticipated £60m".

Wrap received a total of £67.7m in grants in 2006/7, down from almost £80m in 2005/6.

Wrap chief executive Liz Goodwin announced last December that the organisation faced a possible 25% budget cut that would need to a "net reduction" in jobs.

It cut 31 positions on 5 February, but said it would create 18 new posts.

Wrap said it would now "review its priority areas", but it was too early to provide more details of the impact of the budget cuts.

Defra also said the Carbon Trust would receive £47.4m to be partly be used to increase its Energy Saving Loans scheme for small and medium-sized companies.

Label printer John Watson installs world's longest Heidelberg


John Watson & Co, the Glasgow label printer, has installed the world's longest B2 Heidelberg press, which has 15 units and forms part of a £4m-plus investment.

The Speedmaster CD 74 UV press, ordered last summer, has a pre-coater and drier prior to nine printing units, and a double coater with two interdeck driers and an extended delivery system at the end.

The machine will print wet labels and tube and box wraps for the whisky market, which represents 90% of the Glasgow firm's business.

John Watson & Co joint managing director Robert McLachlan said the whisky industry was putting value back into its brands by adding more colours.

"We are keen to have the ninth unit for those extra colours or specific varnishes," he said.

The £9.5m-turnover firm will use the pre-coater to apply metallics, white or pearlescents, and the double coaters to apply spot gloss and overall matt finishes for maximum lift and shelf appeal.

The coaters are also equipped with infra red and hot air dryers.

"Our goal is to have one-pass production with maximum clarity," said McLachlan.

The press will be housed at the firm's 3,000sqm factory.

The investment also included a six-colour Heidelberg CD 74 and Gietz foil-blocker.

Boost for Timestrip as pharma firms choose label


Timestrip's share price rose 3.6% this morning (21 February) after it said it had taken orders for its iStrip label from DHL Healthcare Logistics and distributors to pharmaceutical companies in the UK and North America.

DHL Healthcare Logistics will use the iStrip label in its cold chain logistics operations, following a pilot project last year.

The iStrip label monitors the temperature of sensitive products, such as medical vaccinations, during transportation, and undergoes an irreversible colour change when exposed to freezing temperatures

Timestrip said it would increase production with a European sub-contractor of the iStrip label for use at case and pallet level, following re-orders from distributors that were "modest" in value but "extremely encouraging".

The Hitchin-based firm also said it was close to finalising the manufacturing capability to produce a unit-level label for application to individual vaccine vials.

The firm said it was working with Seattle-based non-profit health organisation PATH to evaluate the use and distribution of the case-level iStrip in developing countries.
Source: packagingnews

Packaging Innovations Weekly Wrap – SOCO SYSTEM Unveils New Palletising System

Danish firm SOCO SYSTEM has unveiled an innovative automatic palletising system – the robot-in-a-box.

The system is installed at the end of the production line and automatically registers the dimensions of the first box. It uses the dimensions to calculate the optimum pallet pattern before beginning palletising.

PEAKFRESH PRODUCE BAGS

British Polythene Industries division bpi.household has launched a line of produce bags designed to prolong the life of fresh fruit and vegetables. After harvest most fresh produce releases ethylene gas, which accelerates the aging and deterioration process.

PEAKfresh produce bags 'breathe' to remove ethylene gas, and also feature anti-fogging technology that reduces moisture build up and inhibits bacterial growth.

BPI says the bags were developed in response to the growing number of consumers throwing away food that spoils before consumption.

ALCOPOP PACKAGING DEVELOPMENTS

Austrian condiment producer Wenger Senf Erzeugungs-und Handels has launched alcopops in a tube onto the Polish market.

According to the firm, Go Wodka is the world's first drink to be sold in toothpaste-like tubes.Available in 190ml and 50ml sizes, the company says the drinks are more convenient at parties as they can be resealed and put in pockets while dancing and reduce the risk of drink-spiking.

Aimed at young people, the product is also available in 15 other countries.

KEEPING CONSUMPTION RESPONSIBLE

The UK's Portman Group, an industry body formed to promote responsible alcohol consuption, has appointed management consultancy PIPC to conduct a comprehensive audit to identify irresponsible packaging.

Companies whose products are considered to be in breach of the group's code of practice will be given six months to change their marketing.

Following that they may face investigation by the Independent Complaints Panel, which has the power to remove drinks from sale.
Source: packaging-technology

PET jar development targets lightweight hot-fill demands

A new development in polyethylene terephthalate (PET)-based jar packaging offers a clear, lightweight and sustainable alternative for use with hot-fill products, according to its manufacturer.

Graham Packaging says that its new multilayer PET jar can be used in a variety of applications for the packaging of hot-fill products such as pasta sauces, salsas and fruits in the place of glass.

Lightweight demand

Group vice president Paul Bailie said that the company had developed the packaging in a bid to meet processors demands for a lightweight jar that was also clear, unbreakable and offered a longer shelf life.

Graham Packaging claimed that the jars can be hot-filled between a temperature range of 195 and 205 degrees Fahrenheit.

"Our multilayer design allows us to provide the lightest-weight jar that enables the longest shelf life," he stated. "The container increases shelf life beyond 12 months, up to 18 months with certain products."

To meet demands for these benefits, the company said that jar was designed to incorporate the company's SurShot multilayer product as well as its jar blow molding technology.

Bailie claimed that this combination ensured that the jar could meet shelf life requirements of processors at a more affordable cost.


In addition, the jar can also be designed into a variety of shapes and configurations from round or rectangular, to more specialist forms with a wide-mouth finish of up to 82 millimetres, the company said.

Sustainability

Graham Packaging also believes that using the jar can offer a number of environmental benefits over similar packaging.

As an example of these sustainability benefits, a processor can make a weight reduction in their packaging of up to 87 per cent on an annual order of 50m jars, compared to when using glass, according to the packager.

Graham Packaging claims that these savings are equivalent to the elimination of 962 delivery truckloads a year for food manufacturers.

The jar itself is constructed out of recycled material, with the oxygen barrier designed to be attachable from the PET during the recycling process. The company says that the SurShot multilayer barrier has also been classed as recyclable by Container Recycling Europe (PETCORE).

Graham packaging has offices in both the US, South America and Europe.
Source: foodproductiondaily

Bee-themed pack creates a buzz




Encouraging consumers to bathe their sore lips in a beeswax-based balm that glides on like honey, new packaging for Lornamead, Inc.'s LipSyl line of five lip care products is as enticing as it is functional. LipSyl, a 100-year-old brand from Sweden, was launched in the U.S. by Stamford, CT-based Lornamead last August.

For the line's U.S. debut, the company says it tweaked the product formulations and created "dynamic new packaging," including a new stick pack with a "handy, bee-grip slider," said by consumers to be "cool" and "fun."

"The lip-balm formulation and packaging were contemporized for launch in the U.S. to make for a premium and memorable product experience," says Lornamead group brand director, Skincare, Karen Murabito. "The primary pack was designed to optimize product application and make it enjoyable. The secondary pack was developed to generate appetite appeal in the very medicinal lip-balm aisle."

Bee-shaped slider

For LypMoisturizer Original Formula and HoneyBerry varieties, Lornamead, in conjunction with HCT Packaging (www.hctpackaging.com), developed an innovative stick package (pictured) with a slider that allows for one-handed product extension. The flattened, oval, 0.10-oz injection-molded package comprises five components: an acrylonitrile butadiene styrene base, a polypropylene piston, a 3D bee-shaped ABS slide button, a seven-color PP heat-transfer sleeve label, and a pearlescent green ABS cap with an embossed honeybee logo. All are supplied by HCT.

Packaging for the remaining three LipSyl varieties includes a 0.28-oz jar, a 0.6-oz stick, and a 0.30-oz flexible tube.

Continuing the bee theme through to the secondary packaging, LipSyl employs a dual-carded blister-pack with cards cleverly die-cut in a honeycomb shape, for all five formulations. DMI (www.dminj.com) developed the blister, which includes extra space for the bee slider on the stick packages. Perforations on the back card allow for easy access to the product, which is contract-packed at DMI's Wharton, NJ, facility.

Blister-card graphics, designed by Muts&Joy (www.mutsandjoy) and printed by CardPak (www.cardpak.com), include an illustration of a golden swath of honey oozing down the top of the card, behind which is a yellow, honeycomb-pattern background. A bee logo tops a LipSyl cartouche near the top of the card. Simple, earth-toned illustrations on the back card depict each variety's four key ingredients-among them are mint, coconut oil, organic shea butter, chamomile, and others.

The products sell for $2.99 nationwide.
Source: packworld

Feb 18, 2008

BPIF and Unite agree on wage increase for print workers


The BPIF and Unite have agreed on a £9.60 per week pay increase for UK print workers.

The increase is applicable to all levels of pay in the industry and extends to shifts and overtime.

Unite said it would recommend the deal to workers, who will vote on 12 March.

The BPIF will also receive feedback from its members during this period.

If the agreement is voted through, companies would be expected to implement the increases on 24 April.

BPIF corporate affairs director Andrew Brown described the negotiations as "a mature dialogue".

"It's the most important thing for the union and it's critically important to our members," he said.

He added that the cash settlement isn't a flat percentage increase. "We want companies to work out for themselves the impact of the increase on their wage bills."

He said some of this could be offset through cost recovery initiatives.

Unite assistant general secretary Tony Burke said: "Given the current difficulties within the printing industry, we believe this is the best that can be achieved by negotiations."

BPIF chairman of the negotiating panel Dominic Walsh said: "This is a fair deal for our industry. The reaffirmation by Unite the union of continuous improvement/cost recovery is a key element of this proposed pay award."

Brown said that although consolidation had taken some pressure off overcapacity within the industry, the rationalisation looked set to continue and that companies remained under pressure.

"There will be companies that can't afford to pay the full increase," he told printweek.com. "What we would say is that such a company should contact the union and the BPIF well in advance of the 24 April implementation date."

He warned: "I daresay that there will be some companies that still won't be able to make that commitment."

Got an opinion? Have your say on the pay increase agreement by voting in our poll on the left of this page.

Source: printweek

Roland DG reveals wide-format integrated printer/cutter


Roland DG has announced a new version of its SolJet Pro III XC-540 printer/cutter, available in the UK for a list price of £17,499.

The company, which specialises in wide-format inkjet printers and integrated printer/cutters, said six machines had been sold so far.

The SolJet features new Roland Intelligent Pass Control technology, which controls dot placement to enhance print quality by creating smoother gradations, flawless solid colours and no visible banding.

The 54-inch printer/cutter is used for a variety of applications, including partial and full vehicle wraps and graphics, signs, point-of-purchase displays, banners, labels and decals.

The new XC-540 features Eco-sol Max inks and is available in two models: the XC-540 in a six-colour CMYKLcLm or a four-colour CMYK configuration; and the XC-540W model equipped with five-colour CMYK+W ink set featuring Roland's new white Eco-Sol Max ink.

The white ink gives printers the flexibility to print in three configurations for added versatility – CMYK plus white, white only and CMYK – and can be used with opaques such as gold and silver, on its own, or as a base coat for other colours.

Roland claims print speeds are 37 to 100% faster than the previous model, depending on the media and print mode selected.
Source: printweek

Liquid filling barrier isolator system


In partnership, Chase-Logeman Corporation and EnGuard Systems have combined their experience of liquid filling and barrier isolation to offer this system at a competitive cost and quality service. ChaseGuard’s tool-free system offers a platform of “standard” modular designs for Liquid Fill & Stopper, as well as Liquid Fill, Stopper & AL Crimp Sealing. This unique standard design method provides lower equipment cost, but also delivers the benefits of enhanced delivery and validation time-lines. A complete line of Transport Docking Isolator units, which can be utilized for transporting vials, stoppers, crimps, change parts, and associated items, is also available.

Source: packworld

Industry speaks out against food chain review for 'excess' packaging slant


Packaging industry chiefs have attacked the Sustainable Development Commission's (SDC) recommendations for a sustainable food chain for "perpetuating the idea there's so much excess packaging".

The Green, Healthy and Fair review, published today (16 February), seeks to persuade government to "harness the power of supermarkets" to help fight obesity, waste, climate change and fair trade issues.

Professor Tim Lang, an SDC commissioner, accused ministers of "being too soft" and "hiding behind retailers" on the issue of waste, and urged the government to "be more ambitious" in its collaboration.

"Supermarkets are very good at pushing waste upstream, and downstream to consumers by encouraging excessive consumption," he said.

However, among the review's recommendations is the development of a 'Packaging Strategy', following on from the Waste Strategy for England published last May.

The goal, SDC said, would be to "set out a clear ambition and identify policies and measures" to reduce packaging waste at source and encourage efficient use of compostable packaging.

Jane Bickerstaffe, director of the Industry Council for Packaging and the Environment (Incpen), said it was "frustrating" that the same arguments about packaging were being repeated, and was "really surprised" that the SDC had not done more research into the data it used.

Bickerstaffe said she did support giving the Packaging (Essential Requirements) Regulations "more teeth", but said that food packaging was one of the areas where a lot of work had already been done.

She said the review perpetuated the idea that "there's so much excess packaging".

"Let's go for excess packaging, but you'd be hard pressed to find any around supermarkets," she added.

Packaging Federation chief executive Dick Searle criticised the review for "mentioning food waste, but focusing more on packaging".

He criticised the SDC for "not taking the time and trouble" to better understand the issue, and said the review "failed to recognise the type of society we live in".

Searle did, however, "absolutely agree" with the need for the government to work with local authorities to improve the consistency of recycling and composting schemes.

The review also questions the impact of the Courtauld Commitment (CC), the voluntary agreement signed between retailers and the Waste and Resources Action Programme (Wrap) in 2005 to reduce waste.

Lang said the CC "was not working or delivering on its own terms" and called for legal enforcement.

But Richard Swannell, Wrap director of retail and organic programmes, defended the CC, saying it was "progressing remarkably well". "Industry has taken a voluntary agreement and is giving it its best shot."

He welcomed the review for highlighting the issues of food and packaging waste, but said that a lot of work was already being done to tackle it.

"You can't help but be impressed by how innovative the packaging sector is when faced [with this] challenge," he said.
Source: packagingnews

Packaging Market Weekly Wrap - Smurfit Kappa and Stora Enso Report Quarterly Results

Paper packaging maker Smurfit Kappa has reported an eight percent increase in fourth quarter core profit.

The Iris firm says earnings before interest, tax, depreciation and amortisation (EBITDA) rose to €275m.

Quarterly revenue also increased 3.9 percent to €1.82bn and full year EBITDA rose 20 percent to €1.064bn.

Chief executive Gary McGann says the group's performance had been helped by a "generally positive price environment" for its products in Europe and higher sales volumes in South Africa.

However, the company also says it experienced slower than expected growth in the second half of 2007 due to a "poor summer season" which limited demand for packaging for products such as ice cream and fruit juice.

STORA PROFITS LARGER THAN EXPECTED

Stora Enso Ojy has reported a larger than expected fourth quarter loss, following rising wood prices and the cost of closing mills.

The €135.3m loss, compared to a year-earlier profit of €263m, was caused by increases to Finnish wood prices by around 30 percent, with one-time costs, including closures, of €388.5m.

Sales from continuing operations increased 1.6 percent to €3.37bn.

The company says although profit improved in the fine paper and industrial packaging divisions, it is not satisfied with the quarter's results.

The US is expected to continue to dominate international packaging machinery sales due to the perceived technological benefits of its products and a favourable exchange rate, according to a recent industry report.

US PACKAGING MACHINE SALES UP

The Packaging Machinery Manufacturers Institute (PMMI) says US manufacturers of packaging machinery accounted for twenty per cent of all global sales in 2006, which is expected to increase over the next two years.

Global sales of packaging machinery technologies originating in US are expected to reach US$6.68bn, by 2009 – an increase of up 3.1 percent on 2006.

O.BERK OFFERS LUXURY GLASS

Glass, plastic and metal containers supplier O.BERK Company has announced the formation of Designer Glass Packaging Group.

CEO Marc Gaelen says the purpose of this division is to offer luxury glass packaging to the fragrance, perfume, high-end gift and collectable markets.

"This offering includes the bottle, closure, decorating or labelling, and carton to present the complete, high-end luxury packaging," Gaelen says.

The group will be headed by Hugues Thibaud, who previously managed Elemental Container Inc.
Source: packaging-technology

Kodak reveals Drupa launch of fastest thermal platesetter


Kodak will use Drupa to release the fastest platesetter in its Magnus 800 line, capable of imaging 60 8-up plates an hour.

It claimed the Magnus 800Z Quantum platesetter delivers faster throughput than any other device in the Kodak range. It incorporates a new thermal head that generates double the laser power of previous Magnus platesetters.

In addition to increased productivity, the Magnus 800Z Quantum can achieve 10-micron Kodak Staccato screening, an advanced FM screening that results in vibrant colours and improved detail.

The Magnus 800Z can also produce up to 35 plates an hour when used with Kodak Thermal Direct non-process plates.

Kodak Graphic Communications Group general manager pre-press solutions Doug Edwards said the platesetter "provides a significant jump in productivity with superb image quality".

He said: "Producing high-definition plates at this speed reduces the time from approved digital proofs to the first press sheet, moving jobs from the workstation screen to the press more quickly and with greater image accuracy".

Kodak will also move into the superwide-format market with the Magnus XLF 80 Quantum.

The device, which can image at speeds of up to 48 plates per hour at resolutions of 2,400dpi, will be available from the second quarter of 2008.

Source: printweek

Feb 10, 2008

Heidelberg announces Suprasetter upgrades for Drupa


Heidelberg has added new features to its Suprasetter range in the run up to this year's Drupa trade fair.

Jürgen Rautert, management board member for engineering and manufacturing at Heidelberg, said the Suprasetter series set the standard for thermal platesetters.

"It offers an excellent price-performance ratio, and the A-series models in particular enable smaller print shops to get a foothold on the CTP market," Rautert said.

"The fact that well in excess of 1,500 systems have been sold so far underscores the success of this series. We have thoroughly revised the series in the run-up to Drupa 2008 and equipped the models with the latest technology to deliver additional customer benefits."

Among the changes, the print manufacturer has increased the power of its laser diodes by about 60%, which enables a much higher plate throughput per hour and shortens the imaging time for individual plate sets.

Suprasetter models 74 and 105 are now available in three and four speed levels, respectively. After Drupa, they will increase to four and five levels with a maximum throughput of 38 plates an hour.

The platesetters run chemical-free or processless printing plates, such as Heidelberg's Saphira Chemfree plate, which can be imaged about 35% more quickly. The manufacturer has also approved about 40 other plates for use in the Suprasetters.

Further changes include a choice of laser heads with resolutions of either 2,540dpi or 2,400dpi, and the availability of press-specific punches for all Suprasetter models.

Heidelberg has also equipped all Suprasetter loaders with a suction system to counter the effect of climatic conditions that can make it difficult to remove the slip-sheet from the printing plate.

The introduction of web-based Remote Services, which can give pre-emptive warning of any faults or maintenance requirements, has lessened the need for site visits, making Suprasetter models more widely available.
Source: printweek

Rigid plastics firms to benefit from climate change rebate


Many of the UK's 3,000-plus rigid plastics packaging firms could soon be eligible for a government-approved rebate against the climate change levy (CCL).

Rigid plastics has been the only packaging sector not to have qualified for a reduction in the CCL, which adds an average of 15% to annual energy bills.

But revised proposals put forward by the British Plastics Federation (BPF) could result in a rebate of up to 80%, subject to meeting agreed targets to minimise CO2 emissions.

The proposals have been approved in principle and are awaiting government ratification, according to BPF public and industrial affairs director Philip Law.

"There have been two hurdles to get over: to prove that energy use within the industry is in excess of 3% of production costs, and that there is more than 50% import penetration," he said.

"The main difficulty has been that plastics processing is treated generically within a broad standard industrial classification band, rather than sector specific. The stumbling block was cleared once we were able to persuade Defra to differentiate between processing for the packaging market and mainly extruded products for the ineligible construction industry.

"I can't say that it's signed, sealed and delivered yet, and there may still be some banana skins along the way, but the indications are very positive."

The BPF is canvassing members to see how many will want to enter into a climate change agreement scheme (CCA).

Law said it should be of interest to companies with an annual energy bill of more than £75,000-£100,000. "That could draw in at least two-thirds of our 300 plastics processing membership," he added.

In acting as the lead association in regulating the CCA, participation would also be encouraged outside of the BPF membership, subject to an administrative charge.

The BPF could also establish a separate company to handle the scheme once it has been approved, which could be "any time between the next few weeks or three months".

Government approval for a CCA would represent a major U-turn in protracted negotiations extending over the past five years.

It would be a timely boost for a sector that, according to a BPF survey carried out 12 months ago, has suffered energy cost increases of 25%-125%.

"Our members' cost-base has been rising across the board," said Law. "Rigid plastics packaging has also come under some pressure from other sectors competing across similar applications, and from mainland Europe where energy costs are lower and free of levy."

While larger organisations are expected to welcome the decision – for example, the annual cost of the climate change levy to RPC Group is approximately £800,000, according to chief executive Ron Marsh – smaller firms are likely to adopt a more cautious approach.

David Barnett, managing director of Dorset-based EPS packaging supplier Simplipac, said: "Our energy bill is about £150,000. As probably the biggest single item within our overall cost of production, this could definitely be of interest.

"However, it would depend upon how much bureaucracy was involved, and to what extent it would incur investment in energy-saving equipment. We're in an area where grants aren't readily available for factory improvements, so it might actually be cheaper to go on paying the levy.

"With margins so tight, anything that can be done to ease production cost is obviously worth looking at – but with what might be involved it's a question of assessing this in terms of the overall priorities in running a very small business. When you sit down and look at the likely payback, it just might not warrant the expenditure we'd have to incur."
Source: packagingnews

Large-format firm Kokoon hunts new markets with Océ Arizona


Bradford-based large-format graphics and sign company Kokoon has installed an Océ Arizona 250 GT.

The new machine has opened the door to a broader set of clients, such as retail, the exhibition market and trade making, said a spokesperson at the company.

The five-staff firm already runs an Océ Colourspan CS7100 alongside two Mimaki JV3 SP machines.

But the Arizona means it can take on work it would previously have had to turn down.

Kokoon managing director David Taylor said: "We chose the Océ Arizona 250 GT because of the excellent quality of its output and the fact that it has enabled us to print things that we would never have been able to do before, in particular for new business pitching.

"For example, for one marketing company, the Arizona enabled us to print on ping-pong balls."

The Océ Arizona 250 GT uses UV-curable inks and boasts Oce's Variadot imaging and piezo inkjet technology to produce variable-size dots for high-quality 600x600dpi images.

It can print on a range of substrates from paper to foam PVC and has a maximum width of 2.5m.

Source: printweek

Packaging Market Weekly Wrap - International Paper Reports 4Q Results

International Paper has reported a sharp fall in fourth quarter profits, but a sales gain in industrial packaging and printing papers.

The firm's fourth quarter net income fell 83 percent to US$327m, down from US$1.98bn a year ago – however 2007's result was skewed by the sale of forest land.

Goldman Sachs analyst Richard Skidmore says despite the drop, results are better than anticipated, driven by stronger operating results in paper industrial packaging and land sales.

Operating profits for the quarter reached US$711m, up from US$425m in 2006.

Full-year operating profits increased from US$2.1bn to US$2.4bn.

Profits from corrugated boxes and other industrial packaging rose 11 percent to US$144m, while profits from consumer packaging increased 48 percent to US$40m.

Chief executive John Farci says he expects global demand for paper and packaging materials to counteract any downturn in the US economy.

PROFIT INCREASE CAUSES HAPPY MONDI

South African paper and packaging company Mondi says its full-year profit has more than tripled.

Mondi has been shutting plants in Western Europe and focussing growth on Eastern Europe, taking advantage of lower costs and faster growth.

"Mondi's performance in 2007 continued to improve, reflecting our favourable product mix, emerging market exposure and competitive cost position," the firm says.

Mondi will release its full earnings report on 28 February.

INTELLIGENT PACKAGING TO GROW

The global market for active, controlled and intelligent packaging is expected to grow 6.9 percent a year until 2013, according to a report by BCC Research.

The report - Active, Controlled, and Intelligent Packaging for Foods and Beverages - says the industry will be worth US$16.9bn in 2008, increasing to US$23.6bn by 2013.

Controlled packaging, with the largest market share, will reach US$7.7bn by the end of 2008, increasing 4.5 percent to US$9.6bn by 2013.

CANON BUYS PHARMAPACK

Canon Communications has purchased the Pharmapack trade show from French organiser Oriex.

Canon will launch a European version of its BIOMEDevice conference and exhibition, aimed at the medical device and biopharmaceutical manufacturing industries, alongside Pharmapack, which is aimed at the European pharmaceutical packaging market.

Terms of the acquisition were not disclosed.

MAXWELL CLOSES EURO DIVISION

Maxell Europe is closing its packaging division, based in the UK, with the loss of 90 jobs.

The firm, which has concentrated on plastic part moulding and contract packaging in recent years, blames "lower volumes and severe price decreases" for the closure.

The plant, in Shropshire, will remain open to house the company's moulding division.
Source: packaging-technology

Autobox reveals box-making kit for Interpack


Autobox will target contract packers and short-run printers with the new Hipak One corrugated box-making machine to be launched at Interpack in April.

The Hipak One can be used to make a variety of corrugated box sizes and styles at speeds of up to 1,000 boxes per hour.

It can create standard boxes with a minimum length of 80mm, width of 30mm and height of 65mm, and a maximum size of unlimited length, 1,000mm width and 1,400mm height.

A corrugated sheet-feeding and cutting system automatically cuts box blanks from master stock sheets, eliminating the need to buy cut-to-size blanks or manually cut blanks from stock sheets.

Single-colour digital printing is optional on the 6m-long by 3m-wide machine.

Autobox, based in Leighton Buzzard, said the Hipak One was suited to box merchants and paper material distributors currently buying in boxes for resale.

The company is also targeting companies that make products needing a number of different box sizes.

Autobox said end users could benefit from cost savings and reduced storage space.

Order lead times of four to six weeks can be expected for the machine.

Interpack takes place on 24-30 April at the Messe Düsseldorf.
Source: packagingnews

Ricoh ties with Equitrac on software supply

Ricoh is to distribute Equitrac's print tracking and cost recovery software, aimed at UK's the legal, architectural and consulting markets.

The deal means Ricoh UK will become the first manufacturer of multifunction device (MFD) in Europe to provide full service distribution, installation and support of the Equitrac Professional 5 (EP5) print tracking and cost-recovery solution.

EP5 is available as a software-centric embedded or terminal-based solution, and offers customers of Ricoh MFDs a centralised system for matter-centric tracking of scanned, copied, faxed and printed documents.

The software also provides accounting and disbursement capture for discovery and recovery of client billable expenses.

Ricoh UK director of marketing Chas Moloney welcomed the expansion of the relationship with Equitrac.

"Users of Ricoh products in the legal and professional office environments will experience more efficient and profitable workflow management with EP5, while IT administrators will enjoy the solution's advanced reporting capabilities that simplify document output management across any fleet of networked MFDs," he said.

The embedded Equitrac client for Ricoh ESA-enabled Aficio MFDs provides any user with the ability to easily track copies with colour and other detailed document attributes through a familiar touchscreen user interface and QWERTY soft-keyboard on the Ricoh front panel.

The terminal-based EP5 solution provides users with a personalised cost-recovery user experience in new Equitrac TouchPoint Console, with integrated card reader support, the standard combination of both LCD touch screen and full 101-key keyboard data entry, roaming user profiles, card-based authentication, user-definable favourites and secure document release for confidential print output.
Source: printweek

Government slammed for environmental budget cuts


The government has come under fire in parliament for the potential impact on the waste and packaging industries of funding cuts to environment bodies.

Martin Horwood, Liberal Democrat MP for Cheltenham, said a rumoured £1bn hole in the budget of the Department for Environment, Food and Rural Affairs showed a "complete lack of joined-up government and contingency planning".

"Perhaps that reflects a view in government that waste recycling is an optional extra and a bit of a luxury," he told a debate in Westminster Hall on Wednesday (6 February), which was attended by only nine MPs.

He said it was alarming that the budget of the Waste and Resources Action Programme, which is charged with packaging reduction and optimisation, faced a 25% budget cut.

He also expressed concern about funding cuts to the BREW (Business Resource Efficiency and Waste) programme, which is charged with channelling extra revenue from landfill tax into projects to support business in improving its resource efficiency.

Waste minister Joan Ruddock said she was "not in a position" to reveal the outcome of funding talks, but said that "just because particular work is done at a particular time does not mean that it should continue".

She also responded to claims that retailers were not co-operating on the recycling of plastics by saying the increase in landfill tax was the "tool to persuade commerce and industry that they should divert waste from landfill".

Eric Illsley MP, chair of the all-party parliamentary group on packaging manufacturing, used the debate to highlight that packaging lightweighting could have unintended consequences, such as the need to increase the weight of transit packs.

He also pointed to the mismatch between local authorities' weight-based targets and the industry's materials-based targets, the poor quality of glass recycling, and the failure of many local authorities to collect plastics for recycling.

Packaging employers risk stiff penalties for hiring illegal workers

Packaging employers have been warned they could face massive fines, or even imprisonment, if they fail to comply with new laws on illegal working that come into force at the end of February.

Section 15 of the Immigration, Asylum and Nationality Act 2006, which comes into force on 29 February, includes the power to fine employers up to £10,000 per illegal worker.

It also identifies the key documents they should check to prove people are eligible to work in the UK.

Documentary evidence that these documents have been checked and show a person is eligible to work will give employers a Statutory Excuse to avoid penalties if the employee subsequently proves to be illegal.

However, under Section 21 of the Act, employers can commit a criminal offence, punishable with up to two years in prison, if they knowingly employ an illegal immigrant.

Dani Novick, managing director of recruitment specialist Mercury Search and Selection, said the Act could have major consequences for the packaging industry.

"In the print and packaging sectors there are already a significant number of immigrant workers," she said.

"There are large numbers of immigrants from EU countries who are eligible to work, so it is easy to assume that anyone who claims to be a UK or EU national is eligible to work.

"However, we have had cases of foreign nationals presenting convincing documentation that subsequently turned out to be forged."

Novick said recruitment companies could help with checking documents but liability still sat with employers.

The change in law will not apply to employees taken on before 29 February, who will still be covered under the Asylum and Immigration Act 1996.
Source: packagingnews

Bakery packing machinery set for trade show roll-out

UK-based packaging firm PFM will exhibit two of its bakery flowrappers at the Bakery Industry Expo (BIE) this April, as part of plans to bring the technology to a wider market, the company said last week.

Flowrappers, also known horizontal form-fill-seal (HFFS) machines, are commonly used in the food industry for end of line packaging, as they can pack a huge range of products using almost any heat sealable or cold-seal wrapping material.

One such machine due for exhibition at the show is PFM's Pearl flowrapper, which was originally developed for an individual customer early last year.

The Pearl is specifically aimed at the bakery market, the company said, as it produces a pillow-style pack for biscuits, cakes and snack bars.

It features a colour touch screen, for easy control of the machinery's parameters such as bag length, wrapping speed, temperature, and the position of any print on the packaging. The Pearl is also capable of speeds of 120 bags per minute, the company claims.

"Its versatility makes the Pearl highly flexible with its host of advanced features," PFM said.

The company will also be taking its Swift flowrapper, PFM's smallest packaging machine, to the BIE show.

With similar features to the Pearl, the Swift is typically used to produce packs that are sealed with heat-sensitive packaging film. It is used for smaller food products measuring up to 350mm in Iength, 220 mm in width and 100 mm in height.

The Swift is almost as fast as the Pearl, and runs at speeds of up to 100 packs per minute, PFM claims.

PFM is a global packaging firm with manufacturing facilities in Leeds, Italy, Germany, Russia and Canada. As well as flowrappers, the company also makes automatic feed systems and weighing systems for the food industry.
Source: foodproductiondaily

BlisterPack machines


The balcony style design of the OYSTAR IWK BP Series separates the drives of the machine from the product contact areas, simplifying the line cleaning and clearance process. The series of machines is completely driven by independent servos that enable the adjustment of individual process times without affecting other stations. In addition, their positive transfer system ensures that blisters are always guided, transported through the machine in a continuous controlled fashion to eliminate the potential for jamming. Machines can package up to 600 blisters per minute, and are available in either intermittent or continuous motion models.

Source: packworld

Waste management of bioplastics and biopackaging

Bioplastics and biopackaging offer multiple waste management options, but these will only be developed in full when there is more material on the market, according to the industry.

Bioplastics are often criticized on the grounds that there are no waste management systems in place. The latter is true, since nobody can expect that waste management systems are in place starting from day 1. In fact they are often still not in place for materials which are on the market for several decades.

As bioplastic and biopackaging applications get more traction in the market, the industry organization, European Bioplastics, is increasingly asked to comment on the consequences of the introduction of these materials in national and regional waste management systems throughout Europe.

Most bioplastics are derived from annually renewable raw materials. These materials do not require fossil carbon as a building block, but in fact, 'cycle' carbon from the atmosphere captured by plants during the growing process.

When bioplastic-based packaging materials (biopackaging) are incinerated or composted, the renewable or biogenic carbon harvested by the plants during the growing season is returned to the atmosphere. Therefore, renewable carbon is cycled in a closed loop.

However bioplastics manufacturing also needs fossil fuels to drive the different production steps. Several bioplastics producers are replacing a part of these fossil fuels by renewable energy.

The overall assessment of the environmental impact of bioplastics as compared to other forms of packaging is a complex matter, for which LCA (Life Cycle Assessment) is often used as a tool.

This tool is a systems analysis tool that accounts for and assesses the relevance of all the environmental interventions, such as raw material use, air and water emissions and final waste produced, associated with a product or service, covering all stages in a product's life, from the extraction of resources to ultimate disposal. Since LCA covers the complete life cycle, it is a good tool to identify and optimize waste management options.

Organizing the most optimized waste management system is not an easy task and is dependent on local infrastructures for collection and recycling, local and regional regulations, the total volume on the market available and the composition of waste streams.

This is also a primary reason why conventional packaging is not always treated in the same way across the EU. Most countries have set up systems to recover and recycle plastic bottles, but for most other packaging, the results are more fragmented and not always very well developed.

In many cases, mixed fossil-based plastic waste fractions are being incinerated and by doing so, energy is being recovered.

Biopackaging that would end up in these waste fractions will also be incinerated with energy recovery, but will generate renewable energy instead, since the carbon is renewable resource based.

With both bioplastics and biopackaging in their infancy, the development of the market should not be delayed even though the most optimal recovery systems have often not been recognized by local authorities.

The risks associated with existing recovery schemes should be monitored. These will be limited at this time given the relatively small volumes that currently enter the market.

Once volumes reach a critical mass, waste management systems which make most sense from an environmental and economic point of view can be set up. Over time, recycling may be the best option for certain bioplastics, especially if a homogenous stream can be organized such as in place for plastic bottles.

Today, there is immense value in increasing the use of bioplastics for food packaging and food service ware especially where industrial composting has the potential to divert a large portion of the organic food waste stream away from landfill disposal and incineration.

These package/food waste streams are generated at many different places within the modern society such as quick-service restaurants, canteens, retailers, music festivals, sport arenas and households. To do this right, clear material identification and separation in the waste stream is required.

Opening up these composting systems for biopackaging, is another way of closing the loop for these innovative packaging solutions. In addition, composting systems are economically very competitive compared with incineration. The generated compost can be used to increase the carbon content in the soil and to maintain soil fertility.

European Bioplastics and its members are committed to contribute positively to these discussions and work groups in order to facilitate the use of these innovative new materials - all while striving to minimize any impact on existing waste management streams.

As people around the globe are also working to make us less dependent on fossil raw materials and reduce greenhouse gas emissions the use of bioplastics and biopackaging solutions can contribute to this in a meaningful way as well.

Harald Kaeb is chairman of the European Bioplastics Board. Erwin Vink is a member of the board and also works for NatureWorks LLC
Source: packwire